Sony CDP-CX450 Operating Instructions Manual page 17

2
Move the cursor to a desired disc by using
CURSOR M/m/</,.
When you press CURSOR M/m, the cursor moves
by one.
When you press CURSOR </,, the cursor
moves by ten.
3
Press CURSOR ENTER.
Note
Artist names of CD TEXT disc are not displayed. Only the
assigned Artist Names are displayed.
Locating a disc using the remote
You can locate a disc using the remote. If you have
stored the Disc Names (see page 27), you can use them
to locate a disc.
Before following the procedure below, be sure to load
the Disc Name data into the remote's memory by
following the procedure in "Loading the Custom Files
into the remote" on page 30.
PLAYER SELECT
MENU
TRACK TRACK
Easy scroll
PUSH ENTER
key
H
CONTINUE SHUFFLE
PROGRAM REPEAT
NAME SCAN DISC
NAME SCAN SKIP
SCROLL
DISC GROUP
DEL SPACE
DISC
&!? ABC DEF
1 2 3
GHI JKL MNO
CHECK
Number
4 5 6
ARTIST
buttons PQRS TUV WXYZ
MODE
7 8 9
ENTER X-FADE
10 10/0
NAME INPUT
CUSOR
ENTER
To locate a disc directly Z
1
Press DISC.
2
Press the number button of the disc.
Example: To enter number 35
Press 3, then 5.
BACK
SCROLL
CAPS
CLEAR
HIT
LIST
–– MEGA ––
NO DELAY
ENTER
3
Press ENTER to start play.
To locate a disc directly while observing the remote's
display Z
1
Move the cursor (B) to the desired disc by using
the Easy scroll key.
CD1
0 5 : D I SC - 5
0 6 : D I SC - 6
0 7 : D I SC - 7
0 8 : D I SC - 8
2
Press the Easy scroll key.
If the player has no disc in the slot you selected,
"NO DISC!!!" appears.
z
When you operate the 2nd player
Follow the procedure on page 41 so that "2nd player"
appears in the remote's display, then operate from the
step 1.
Notes
• The Shuffle (on page 20) and Program (on page 21) Play
modes are canceled when you locate a disc using the
remote.
• If the MEGA CONTROL button or the HIT LIST button is
lit, you cannot locate a disc by observing the remote's
display.
To locate a disc by scanning each Disc Name
(Name Scan) Z
You can locate a desired disc quickly by scanning the
Disc Names (see page 27) in the display.
Note that you cannot use this function in the ALL
DISCS Shuffle Play mode.
1
Press NAME SCAN.
"NAME SCAN" appears in the display, and the
Disc Names scroll in the display.
2
Press H when the Disc Name of the desired disc
appears.
The disc is set to the playing position, and the
player starts playing.
In Program Play mode, the disc is added to the end
of the program if you press ENTER instead of H.
Note
If "NO ENTRY" appears in the display, no disc has been
labeled with the Disc Name. Try the Name Scan function
again after labeling the discs.
Playing CDs
Playing CDs
17