Cleaning And Lubricating The Drive Chain - Yamaha T135 SE 2016 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Left side
b
3
1
1. Axle nut
2. Adjusting plate
3. Stopper alignment.
6
TIP:
Make sure that both adjusting plates
are in the same position for proper
wheel alignment.
4. Tighten the axle nut and brake
torque rod nut to the specified
2
torques.
a
Tightening torques:
Axle nut:
60 Nm (6.0 m·kgf, 43 ft·lbf)
Brake torque rod nut:
19 Nm (1.9 m·kgf, 14 ft·lbf)
5. Adjust the brake pedal free play.
(See page 6-22.)
WARNING
WARNING
After adjusting the brake pedal free
play, check the operation of the
brake light.
Cleaning and lubricating the
drive chain
The drive chain must be cleaned and
lubricated at the intervals specified in
the periodic maintenance and lubrica-
tion chart, otherwise it will quickly wear
out, especially when riding in dusty or
wet areas. Service the drive chain as
follows.
NOTICE
The drive chain must be lubricated
after washing the motorcycle and
riding in the rain.
1. Remove all dirt and mud from the
TIP :
For a thorough cleaning, have a
Yamaha dealer remove the drive chain
and soak it in solvent.
6-27
drive chain with a brush or cloth.