Rear Wheel - Yamaha T135 SE 2016 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
2
2
1. Retainer
2. Slot
3. Insert the wheel axle, and then in-
6
stall the washer and the axle nut.
4. Take the motorcycle off the center-
stand so that the front wheel is on
the ground.
5. Tighten the axle nut to the speci-
fied torque.
Tightening torque:
Axle nut:
40 Nm (4.0 m·kgf, 29 ft·lbf)
TIP:
When tightening the axle nut, hold the
wheel axle with a wrench to keep it from
turning.
6. While applying the front brake,
1
1
push down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.
7. Connect the speedometer cable.
6-37

Rear wheel

To remove the rear wheel
1 2
1. Brake pedal free paly adjusting nut
2. Brake torque rod nut and bolt
3. Axle nut
WARNING
WARNING
It is advisable to have a Yamaha
dealer service the wheel.
Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Loosen the axle nut.
2. Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod from the brake cam-
shaft lever.
3