Introduction - Polymaker PolyBox Operation Manual

INTRODUCTION

Thank you for purchasing the PolyBox from Polymaker! With PolyBox you'll
TM TM
experience no more 3D printing problems caused by filaments absorbing moisture
such as extreme oozing, rough surface quality, weaker 3D prints, 3D printer
damages and so on!
Polybox includes a built-in high-precision hygrometer and silica gel desiccant
TM
sachets to control and absorb moisture from the air. The humidity within the box
is maintained below 15% to prevent the filament from absorbing moisture during
the storage and even during the 3d printing process. It is specifically designed
for Nylon, PVA, PolySmooth and other highly hygroscopic 3D printing materials.
TM
However, its good practise to keep all 3D printing filaments inside the PolyBox to
TM
preserve the optimum printing quality.
PolyBox is compatible with both 1.75mm and 2.85mm filaments and can contain
TM
up to two 1kg spools or one 3kg spool!
4