Back Panel - DStv HD PVR Viewer's Manual

B P
ACK ANEL
1 RF In and RF Out
2 Satellite / Tuner Inputs 1 to 4
3 Tuner 2
4 S-Video
5 ESATA
6 HDMI
7 Ethernet
8 USB
9 Scart
10 Mains Connector
11 Composite Video Out
12 Audio Left and Audio Right
13 Component Video (YPrPb)
14 Coaxial Digital Audio Output
15 Optical Digital Audio
If you have technical
comments or want to
chat to other users about
the installation and
connection of the HD
PVR, visit the forums at
www.dstv.com
HD PVR Viewer's Guide – UEC
Connect RF In to the terrestrial antenna.
Connect RF Out to the TV antenna input.
Connect to the quad (4-wire) LNB feeds from the dish.
If using a SatCR LNB feed, connect to LNB input 2.
Connect SatCR LNB feed.
Connect to S-Video input on the TV.
Reserved for future use.
Connect to the HDMI input on the HD TV or Home Theatre
system.
Reserved for future use.
Reserved for future use.
Connect to the Scart input on the TV.
Connect to the mains supply using the power cable.
Connect to the video input on the TV.
Connect to the audio inputs on the TV.
Connect to the component video inputs on the TV.
Connect to the coaxial input on the Home Theatre amplifier.
Connect to the optical input on the Home Theatre amplifier.
HD quality content is
only available via HDMI.
The HDMI input on the HD
TV must be HDCP
compliant.
The 5.1 surround
sound is delivered
through the optical and
digital coaxial audio
outputs and is not
available via HDMI.
Page 6 of 62