Remote Control Basics; Tv, Alt, Tv Guide, Language And Mute Buttons; The Dial - DStv HD PVR Viewer's Manual

TV, A , TV G , L
LT UIDE
The five buttons at the top of the remote control each have a secondary function (sometimes referred to
as the "shifted" mode).
If you have not first pressed SHIFT, these buttons do the following :
TV : always take you to Live TV. If you are viewing from the buffer, pressing TV takes you to Live
o
TV on the current channel. If you are viewing in playback, pressing TV stops playback and takes
you to Live TV on the current channel.
ALT : goes to the last viewed channel.
o
TV GUIDE : goes to the TV Guide.
o
LANGUAGE : displays the Language / Soundtrack pop-up.
o
MUTE : switches the audio on or off (depends on the current audio status).
o
To activate the secondary functionality, press SHIFT followed by the required button. After pressing
SHIFT, the SHIFT button will flash, confirming the mode of the remote control. It is not necessary to hold
both buttons down at the same time.
SHIFT TV : goes to the Audio Bouquet.
o
SHIFT ALT : displays the Subtitles / Teletext pop-up
o
(
Note : Subtitles / Teletext are not currently available on the HD PVR).
SHIFT TV GUIDE : currently disabled.
o
SHIFT LANGUAGE : goes to the Parental Control Menu
o
(Note : a valid PG PIN code is required to enter the Parental Control Menu).
SHIFT MUTE : currently disabled.
o
T D
HE IAL
The dial should be set to TV1 for use with the HD PVR. sent
The "window" in the dial (where you see TV1) lights up when any button is pressed, confirming that the
remote control is active and that the command has been transmitted to the decoder.
HD PVR Viewer's Guide – UEC
M
ANGUAGE AND UTE BUTTONS
Page 13 of 62