Equipment Set-Up - DStv HD PVR Viewer's Manual

Hide thumbs Also See for HD PVR:
Table of Contents

Advertisement

➋ ➋ ➋ ➋
E
S
QUIPMENT
ET
1
TV Type
2
High Definition
Output (HDMI)
3
TV Link
4
UHF Tuning
5
Lip-sync Delay
6
Audio Output
7
Scart Output
8
Local Time
HD PVR Viewer's Guide – UEC
-U
P
Options : PAL I, PAL BG.
Options : Original, Native, 576i (PAL), 575p, 720p, 1080i.
If you select Original, the HD PVR will automatically select the resolution of
the display to match the resolution of the broadcast. So, if the broadcast is in
576i and the TV supports 576i, the HD PVR will use 576i (otherwise it will use
the default resolution). If the broadcast is 720p and the TV supports 720p, the
PVR will use 720p (otherwise it will use the default resolution).
If you select Native, the TV sends the HD PVR a list of supported resolutions
and the HD PVR will use the "best" resolution (respective to TV) for all
broadcasts.
NOTE : In the case where the TV does not indicate its native resolution, the PVR
will use the highest supported resolution.
For all other settings : The HD PVR will send all broadcasts in this fixed
resolution to the TV, and this resolution only.
The TV Link is disabled unless the XtraView Communication Port and
Remote Mode have been selected in the XtraView Set-up Screen.
Use the number buttons on the remote control to enter a value.
Audio / video sync problems are commonly caused when a significant
amount of video processing is performed on the video component of a
channel by a display device. The lip-sync issue can be corrected by adjusting
the lip-sync setting.
Options : Variable, Fixed.
Variable audio output allows you to adjust the volume while viewing whereas
fixed only allows the volume to be muted. Fixed volume is recommended if
content is being recorded to an external device such as a video or DVD, as it
assures that the recorded volume is consistent.
Options : Composite, S-Video, RGB
If the time displayed on the front panel of the HD PVR or on the i-Plate does
not correspond with the actual time, change this setting to the local time.
The default settings are :
1.
TV Type = PAL I
2.
High Definition Output = Original
3.
TV Link = Disabled
4.
UHF Tuning = 63
5.
Lip-sync Delay = 0
6.
Audio Output = Variable
7.
Scart Output = Composite
8.
Local Time = Local Time
Page 51 of 62

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for DStv HD PVR

Table of Contents