Location And Function Of Parts - Sony WH-1000XM3 Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM3

Location and function of parts

1.
L mark
2.
Tactile dot
The left unit has a tactile dot.
3.
Built-in antenna
A Bluetooth antenna is built into the headset.
4.
N-Mark
5.
left unit
6.
Slider
Slide to adjust the length of the headband.
7.
Headband
8.
Microphone (external) for the noise canceling function
Picks up the sound of the noise when the noise canceling function is in use.
9.
R mark
10.
Microphone (internal) for the noise canceling function
Picks up the sound of the noise when the noise canceling function is in use.
11.
right unit
12.
Touch sensor control panel
Remotely controls music playback of the connected Bluetooth device or performs other operations using touch
operation.
13.
NC/AMBIENT (noise canceling/Ambient Sound Mode) button
Press and hold (about 2 seconds) to optimize the noise canceling function (NC Optimizer).
14.
Indicator (blue/red)
Lights up in red or blue to indicate the power or communication status of the headset.
15.
(power) button
10