Advertisement
Location of parts and controls
SET
MENU
ENTER
TUNING+/–
PRESET+/–
RADIO ON/OFF
BAND
2
3
Playing a tape
Press ( (play).
1
Open the cassette holder and insert a
cassette. Then close the cassette holder
and lock the buckle.
To
2
4
Stop playback
3
Fast-forward
or rewind the tape*
*Notes on fast-forward and rewind
5
1
• Check tape direction and choose ) or 0
accordingly.
• If you leave the unit after the tape has been wound or
rewound, the batteries will be consumed rapidly. Be
sure to press p.
2
Press MENU repeatedly to set the cursor
to TAPE in the display.
To limit the maximum volume
Then press SET to select the tape type.
automatically
No message: normal (TYPE I)
Press MENU repeatedly to set the cursor to AVLS in
METAL: CrO
(TYPE II) or metal (TYPE
the display. Then press SET to show "
2
IV)
maximum volume is kept down to protect your ears,
even if you turn the volume up. To cancel the AVLS
SET
TAPE
function, press SET so that "
MENU
AVLS
VOL
BATT
)
0
(
p
œ
Tips
• To switch the playback side, press œ.
• To emphasize deep bass sound, press MENU
repeatedly to set the cursor to MEGA BASS in the
display. Then, press SET to show "ON".
To cancel the MEGA BASS function, press SET so that
"ON" disappears.
Press
MEGABASS
p
) or 0
Notes
• When you turn on AVLS:
- the MEGA BASS effect is reduced.
- turn down the volume if the bass-boosted sound
becomes distorted or unstable.
• Do not open the cassette holder while the tape is
running.
". The
" disappears.
To improve broadcast reception
Listening to the radio
For FM, extend the headphones/earphones cord or
adjust FM MODE (Press MENU repeatedly to set
1
the cursor to FM MODE in the display, then press
Press RADIO ON/OFF.
SET to choose from "DX" or "LOCAL", or "MONO"
or "ST").
For AM, reorient the unit itself.
RADIO
ON/OFF
FM
FM MODE
2
Press BAND repeatedly to select FM or
AM.
BAND
3
Press TUNING +/– to tune in to the
station you want.
AM
TUNING
To turn off the radio
Press RADIO ON/OFF.
Tip
To tune the station quickly
While listening to the radio, you can switch to the tape
Hold down TUNING +/– in step 3. The frequency
by pressing ( (play), 0 or ) .
digits change quickly. When you release the button,
scanning begins and automatically stops when it
Note
receives a station.
If the broadcast becomes noisy when a cassette with a
metallic shell or label is inserted, remove the cassette.
To cancel the stored station
Presetting radio
Follow the procedure above and in step 3, instead of
tuning in to a station, press and hold TUNING+/–
stations
until "- - - -" is displayed. Press ENTER while
You can store radio stations into the unit's memory.
"- - - -" is flashing.
You can preset up to 16 radio stations for FM and 8
stations for AM.
To play the preset radio stations
Press BAND to select the band, and then tune in to a
To tune in to and store stations
station using PRESET +/–.
automatically (Auto Memory Scanning
FM MODE
function)
1 Press RADIO ON/OFF.
Receiving stations
2 Press BAND repeatedly to select FM or AM.
3 Press ENTER until "A" appears in the display.
outside your country
The Walkman starts searching and storing
(excluding models for
stations.
When a station is stored, the preset number
Europe and Saudi Arabia)
appears.
The frequency range differs depending on the area
Note
(see the chart "Area indication and frequency range").
If some stations are already stored, the new stations
If you listen to the radio in an area of different
replace the old ones.
frequency range, change the area indication.
To store stations manually (Manual
1 Press RADIO ON/OFF to turn on the radio.
Memory function)
2 Press ENTER.
You can preset the stations in any order.
3 Press and hold BAND until the area indication
flashes in the display.
1 Press RADIO ON/OFF.
4 Press BAND repeatedly to select the following area
"Eur", "JPn" or "USA" and press ENTER.
2 Press BAND repeatedly to select FM or AM.
3 Press ENTER.
5 Tune in to and store stations as necessary following
the procedure of the "Listening to the radio" and
The frequency digits and a preset number flash in
"Presetting radio stations".
the display.
4 While the frequency digits and the preset number
are flashing, tune in to a station you wish to store
Note
using TUNING+/–, and select a preset number
If you change the frequency range, all the preset stations
using PRESET+/–.
will be canceled.
5 While the frequency digits and the preset number
are flashing, press ENTER.
Area indication and frequency range
6 Tune in to a station using PRESET+/–.
Area*
Notes
• If you cannot complete step 3 or 4 while the
Eur
indications are flashing, repeat from step 2.
JPn
• If a station is already stored, the new station replaces
the old one.
USA
* Eur: European and other countries
JPn: Japan
USA: North, Central, and South America
frequency range
FM (MHz)
AM (kHz)
87.5–108
531–1,602
76–90
531–1,710
87.5–108
530–1,710
Advertisement
