Wireless Connection (Optional) - Zte MF253V Getting Started

1.
Power on your device, and enable the Wi-Fi function on your device.
2. Enable the WPS function. Please check the WPS Setting on the CPE Configuration Page.
3.
Press the WPS button on your device to start Wi-Fi Protected Setup authentication process.
4.
Enable the WPS function on your client to respond to this authentication process.
5.
Follow the system prompts on your client to finish the connection.

Wireless Connection (Optional)

If you want to use Wi-Fi to connect your device, please refer to the following steps.
1. Make sure that the Wi-Fi works normal. Please check the Wi-Fi Setting on the CPE configuration page
or check the Wi-Fi indicator.
2. Power on your device. Use the Wi-Fi application on a client to search for available wireless networks.
NOTE:
Set the client to obtain an IP address automatically. For the detailed procedure, refer to Configuring Your
PC. The client gets an IP address, for example, 192.168.0.101.
3.
Select the SSID (wireless network name) of your device, and then click Connect.
NOTE:
10