AEG 63Z Instruction Manual page 14

Manual for Model 63Z
Winding the bobbin
8. Press on the foot control to start
winding the bobbin.
9. After the desired amount of thread is
wound, stop the machine and cut the
thread near the hole of the bobbin.
Continue filling the bobbin until it is
full. Once the spool is full, it rotates
slowly. Release the pedal or stop the
machine. Push the bobbin winder
spindle to the left.
Note:
Use a bobbin that has been correctly
wound with thread, otherwise the needle
may break or the thread tension will be
incorrect.
10. Cut the thread and then remove the
bobbin.
Note:
When the bobbin winder spindle is placed
on the right, "bobbin winding position", the
machine will not sew and the handwheel
will not turn. To start sewing, push the
bobbin winder spindle to the left "sewing
position".
12