Setting The Cleaning Level; After Automatic Self Cleaning - BALAY 3HB559AP Instruction Manual

Setting the cleaning
level
Once cleaning is finished
Setting tips:
Cancelling cleaning
Adjusting the cleaning level
Setting a later end time
After automatic
self cleaning
All manuals and user guides at all-guides.com
1.
Switch on the oven using the % switch.
2.
Press the t switch.
Cleaning level 3 is suggested.
You can start the self cleaning immediately by
pressing the @ switch.
If you wish to change the cleaning level:
3.
Use the rotary selector to set the desired cleaning
level.
4.
Press the @ switch to start the cleaning operation.
The oven door locks shortly after cleaning process
starts. The H symbol for the lock lights up. You
cannot open the oven door again until the symbol
goes out.
The oven stops heating. The cleaning time is shown
in the clock display as 00:00. You will not be able to
open the oven door until the H symbol goes out.
Press the % switch to switch the oven off. The oven
door remains locked while the H symbol is lit.
Once cleaning starts, the cleaning level can no longer
be changed.
The end time of the self cleaning can be delayed.
In this way, self cleaning can run overnight, for
example, so that you can use your oven during the
day.
See the Time functions, End time chapter.
Once the cooking compartment has cooled down,
wipe out the ash that has been left behind in the
cooking compartment with a damp cloth.
37