Audio Technica M3 Setup And Operation page 5

M3TTransmitter Controls
(front panel)
1
2 3
1. Power switch.
Note: If you power off the M3T transmitter in the RF
OFF mode, the next time you depress the M3T power switch,
the transmitter will remain in RF OFF mode. To resume
transmission of RF, you must change the menu setting as
described on page 7.
2. Headphone output.
3. Headphone level control.
4. Liquid crystal display.
5. Up/Down buttons.
6. Mode/Set button.
Touch:
Hold:
7. Detachable flexible antenna.
All manuals and user guides at all-guides.com
7
4 5 6
"RF OFF"
RF Power Adjustment,
(rear panel)
9 9
8
8. Data port.
9. Loop output.
10. Attenuators.
11. Inputs.
12. DC input.
13. Cord hook.
Phantom power
CAUTION: If connecting instruments to a mixing console through
the transmitter loop output, then use a direct box to prevent
damage to your instruments and/or equipment from the mixing
console's phantom power; i.e. hook your instrument into a direct
box, then hook your direct box into the transmitter.
10 1 1 10
1 1 13
12
EN