Fitting The Handle - Numatic SSIVD 1800 DH Owner's Instructions Manual

Thank you for purchasing the Numatic Specialised Engineering Separator Swarf Vacuum, the product has been
designed specifically to cater for the removal of swarf particlulates and coolant combined.
The swarf / coolant is drawn into the machine via the cyclonic entrance and once inside falls into a
collection basket where the coolant will drain through into the bottom drum assembly.
These instructions cover our complete range of Swarf Separator Vacuum products.
SSIVD 1800 DH (Dump hose)
The vacuum has a hose fitted with a bung, allowing the machine to be drained into a suitable
environmentally approved collection point, or returned to the cutting machine for further use.
SSIVD 1800 PH (Pump hose)
The vacuum is fitted with a pump allowing the operator to remove the coolant from the machine as required by
the green On/Off switch fitted on the handle assembly, allowing the machine to be drained into a suitable
environmentally approved collection point, or returned to the cutting machine for further use.
SSIVD 1800 AP (Auto Pump)
The vacuum is fitted with an auto pump enabling the machine to remove the coolant through a 10 metre dis-
charge hose, allowing the machine to be drained into a suitable environmentally approved collection point, or
returned to the cutting machine for further use.

Fitting the handle

1 2 3