Page 5
Fitting the Face CLICK CLICK Removing the Face CLICK...
Page 6
Wand docking 601059 237578 Cleaning the Tool Head...
Page 7
Check for any worn or damaged parts and replace immediately. Do not steam clean or pressure wash. Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer or the Numatic Technical helpline +44 (0)1460 269268...
Page 8
● Replace any worn or damaged parts immediately. ● Regularly examine the power cord. If damage is found such as cracking or ageing the power cord must be replaced by a competent person using the correct Numatic original part. ● Change dust bag frequently.
Page 9
Vacuum Cleaner Type: HVR, HET, HHR, HVX, HDK, HDX, HDH, HRP, HEP, VNR, NNR, series NRV, EVR Manufactured by: Numatic International Limited Relevant standards upon which conformity is declared include: IEC 60335-1 EN 60335-1:2012 IEC 60335-2.2 IEC 60335-2.69 EN 60335-2.69:2012...
Page 10
The Seal of Approval endorsement forms a part of this initiative. Allergy UK Helpline : 01322 619898 Weekdays: 9am - 5pm www.allergyuk.org E Mail: info@allergyuk.org Numatic International Limited, Chard, Somerset, TA20 2GB Telephone: 01460 68600 Fax: 01460 68458...
Need help?
Do you have a question about the Henry Micro HVR 200M-A2 and is the answer not in the manual?
Questions and answers