According to the European Directive 2002/96/EC on waste electrical and electronic equipment and its incorporation into national law. Vacuum cleaners that are no longer suitable for use must be separately collected and sent for recovery in an environmental-friendly manner. (personal protective equipment) that maybe required for certain operations.
Page 3
If the vacuum cleaner has a blockage, switch off, remove the plug from the wall, inspect the floor tool, tubes and hose for debris. If the floor tool, tubes and hose are clear, replace the dust bag and clean the filter.
Page 4
-Regularly examine the power cord. If damage is found such as cracking or ageing the power cord must be replaced by a qualified person. -Only replace the power cord with the correct Numatic approved replacement part. DON’T: -Unreel the cable with one pull or pull on the cable to unplug the machine from the power supply.
EN 50366 2003 A technical construction fi le for this equipment is retained at the manufacturer’s address. Signed: Name:Allyn Boyes Page 6 Vacuum Cleaner Numatic International Limited Date: 11 /05/2010 Position: Technical Manager Numatic International Limited, Chard , Somerset. TA20 2GB www.numatic.co.uk...
Need help?
Do you have a question about the HVR200M and is the answer not in the manual?
Questions and answers