Arcam FMJ AV8 Service Manual page 7

All manuals and user guides at all-guides.com
Technical Specifications
Audio
Line input sensitivity (set to Reference)
Input impedance
Preamp output level (nominal)
Output impedance
Signal/noise ratio (unwtd 20Hz –20kHz)– analogue
Signal/noise ratio (unwtd 20Hz –20kHz)– digital (24-bit)
THD+N – analogue
THD+N – digital (24-bit)
Headphone maximum output level into 600 ohm
Output impedance
Video inputs and outputs
Input and output impedance
Composite video level
HF response to (–3dB)
S-video level (Y/C)
HF response to (–3dB)
HQ (component) video
level (Y/Cr/Cb)
level (R/G/B)
HF response to (–3dB)
Digital inputs
Coaxial connection (level/impedance)
Acceptable sampling frequencies, all inputs
Digital output
Output level/impedance
Sampling frequency in ADC output mode
Trigger outputs
Output D.C. voltage (excl. RGB status)
Allowable load
Remote inputs and output
Signal
Coding
General
Mains voltage range
Power consumption
Power consumption (standby)
Dimensions Width x Depth x Height (including feet)
Weight (net)
Weight (packed)
Supplied accessories
2V rms
10k ohm
2V rms
25 ohm
>100dB
>98dB
0.0012%
0.0015%
5V p-p
5 ohm
75 ohm
1V
12MHz
1V/0.28V
12MHz
1V/0.5V/0.5V
1V/1V/1V
300MHz
0.5V/75 ohm
44.1kHz, 48kHz,
(96kHz stereo only)
0.5V/75 ohm
44.1kHz
12V ±1V
30mA max (min 400 ohm)
modulated 36kHz carrier
Philips RC-5
85V to 265V
35VA
32VA
433mm x 360mm x 130mm
9kg
14kg
Mains lead
CR80 remote control
2 x AAA batteries