Honeywell BA300 Series Product Specification Sheet

EN0H-1242GE23 R1117
BA300
Backflow Preventer
with flanged connections

APPLICATION

Backflow preventers of this type are suitable for the
protection of drinking water systems against back pressure,
back flow and back syphonage.
Fluids up to and including liquid category 4 to EN 1717 are
protected.
They can be used for residential buildings, industrial and
commercial purposes within the scope of their specification.
The powder-coated ductile iron housing provides increased
corrosion protection.

APPROVALS

• DVGW
• BELGAQUA
• NF
• KIWA
• WRAS
• SVGW
• VdS (BA300-80ZVDS)
• VA-ETA

SPECIAL FEATURES

• Optimal protection of the drinking water supply system
• Easy access to all internal components
• Powder-coated inside and outside - Powder used is
physiologically and toxicologically safe
• Easy Maintenance due to optimized construction
• Triple security - two check valves and a discharge valve
separate the backflow preventer into three pressure
zones
• Few individual parts
• Light weight
• Standardised discharge connection
• All materials are ACS approved
• All materials are KTW approved
• Approved by OTH (Hungary)
Product Specification Sheet • EN0H-1242GE23 R1117 • Subject to change
Backflow Preventers

TECHNICAL DATA

Media
Medium:
Connections/Sizes
Connection size:
Discharge pipe connection:
Pressure values
Min. inlet pressure:
Max. operating pressure:
Operating temperatures
Max. operating temperature
medium:
Specifications
Installation position:
Drinking water
DN65 - DN200
DN150
1.5 bar
10.0 bar
65 °C (WRAS 60 °C)
Horizontal with discharge
valve downwards
1