Sony ERS-1000 Help Manual page 9

Help Guide
ENTERTAINMENT ROBOT
ERS-1000
Features on aibo's body surface (Button, LEDs, Pins)
1.
Status LED
Indicates the state of aibo. See
2.
Power button
Turns on aibo or puts aibo in sleep mode.
3.
Charging pins
Pass through power for charging aibo's built-in battery while in contact with the charge connector on the charging
stand.
4.
Wi-Fi network LED
Indicates the state of the connection between aibo and a Wi-Fi network. See the following table for the LED
indications.
5.
Mobile network LED
Indicates the state of the connection between aibo and your mobile network. See the following table for the LED
indications.
Indications of the network LEDs
Wi-Fi network LED
Indication
Lit in green
Flashing in green
Flashing in red
Flashing alternately in
green and red
Checking the status LED for the state of aibo
aibo is connected to the Internet through a Wi-Fi network.
aibo fails to establish a connection to a Wi-Fi network.
The settings for connecting to the Wi-Fi router/access point may not be properly configured.
Check the Wi-Fi router/access point for power supply or LAN cable connection.
The attempt to connect to a Wi-Fi network with Wi-Fi Protected Setup™ button failed.
Check the Wi-Fi router/access point for its state and repeat the connection procedure with
the Wi-Fi Protected Setup™ button all over again.
aibo is waiting for a connection to a Wi-Fi network to be established.
for more information.
State
9