Sony ERS-1000 Help Manual page 111

Help Guide
ENTERTAINMENT ROBOT
ERS-1000
What if the status LED flashes in red?
When the status LED on the back of aibo's neck is lit in green/orange or flashing in green to indicate the battery state of
charge, then goes flashing in red, aibo needs owner's help.
Do either of the following depending on the app in use to find out the actions that you should take.
On the My aibo app for smartphones: Open the My aibo home screen and select [My aibo] - [Body].
On the My aibo app for computers: Open the My aibo home screen and select the [Body] tab.
Flashing once in red
Restart your aibo
Press and hold the power button for 2 seconds to turn aibo off, and then press and hold the power button for 2 seconds
again to start aibo.
Flashing twice in red
Your aibo's joints has been kept from operating
For your safety and to protect aibo, some or all of your aibo's joints has been kept from operating. Wait for a while, or
press the power button to put aibo into sleep mode.After the status LED lights up red and aibo goes into sleep mode,
place aibo on a flat surface with its front paws and back paws folded forward as shown in the picture. Then, press the
power button.
Flashing three times in red
Your aibo is in an improper position
It is difficult for aibo to stand up from its current position. Place aibo on a flat surface with its front paws and back paws
folded forward as shown in the picture, and then press the power button.After the status LED lights up red and your aibo
goes into sleep mode, press the power button again.
Flashing four times in red
111