Setting Up; Choosing The Power Sources - Sony CFD-930L Operating Instructions Manual

Setting Up

Choosing the
power sources
You can use the AC power or batteries as
a power source.
Use the AC power source whenever you
record since recording consumes much
power.
Tip
Only for the
customers supplied
with an AC plug
adaptor:
Use the supplied AC
plug adaptor if the plug
of the AC power cord
does not match your
outlet.
Note
When you operate the
player with the
batteries, you cannot
turn on the player
using the remote.
18 EN
Setting Up
Battery compartment
Connecting the AC power cord
Insert one end of the supplied AC power cord to the
AC IN socket located at the rear of the player, and the
other end to the wall outlet.
Adjusting the voltage (CFD-V25/V34/V37 only)
Be sure to set the VOLTAGE
SELECTOR (at the bottom) to
your local power supply.
Inserting batteries into the remote
Insert two R6 (size AA) batteries (not supplied)
Replacing batteries
With normal use, the batteries should last for about
six months. When the remote no longer operates the
player, replace all the batteries with new ones.
AC IN
to a wall outlet