Power; Pairing The Soundbar And Subwoofer; Automatic Pairing; Manual Pairing - Monoprice SB-200SW User Manual

Power

Perform the following steps to connect the soundbar and subwoofer to AC power.
1. Plug one of one of the included AC
power cords into the AC socket on the
soundbar, then plug the other end into
a nearby AC power outlet.
2. Plug one of one of the included AC
power cords into the AC socket on the
subwoofer, then plug the other end into
a nearby AC power outlet.

PAIRING THE SOUNDBAR AND SUBWOOFER

Automatic Pairing

The subwoofer and soundbar will automatically pair when both units are plugged in and
powered on.
Notes:
 Do not press the PAIR button on the subwoofer, unless performing manual pairing.
 If automatic pairing fails, perform manual pairing.

Manual Pairing

Perform the following steps to manually pair the subwoofer and soundbar.
1. Ensure that the soundbar is in Standby Mode.
2. Press and hold the PAIR button on the rear of the subwoofer for a few seconds. The
subwoofer will enter Pairing Mode and the Paired LED will begin blinking rapidly.
3. Press the Power button on the soundbar top panel or the remote control to turn
the soundbar on.
13