CONTENTS SAFETY WARNINGS AND GUIDELINES ............................4 FEATURES ..........................................5 CUSTOMER SERVICE ....................................6 PACKAGE CONTENTS ....................................6 PRODUCT OVERVIEW ....................................7 Soundbar Front Panel ..................................7 Soundbar Top Panel ....................................7 Soundbar Rear Panel ..................................... 8 Remote Control ......................................9 Subwoofer Rear Panel ..................................
Page 3
Bluetooth Pairing ....................................15 Disconnecting Bluetooth ................................16 TROUBLESHOOTING ....................................16 SPECIFICATIONS ......................................17 TECHNICAL SUPPORT ....................................18 REGULATORY COMPLIANCE ................................18 Notice for FCC ......................................18 Radio Notice for FCC ..................................19 Notice for Industry Canada ................................19 Radio Notice for Industry Canada ............................20...
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. ...
Never unplug the unit by pulling on the power cord. Always grasp the connector head or adapter body. Ensure that power is turned off and disconnected before making any electrical connections. Remove the battery from the controller if it will go unused for a lengthy period of time.
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com.
PRODUCT OVERVIEW Soundbar Front Panel 1. LED Indicators: The LEDs indicate the mode and operation status. The different colors and their meaning are as follows: Solid Red: The soundbar is in Standby Mode. Solid Green: The soundbar is powered on and in AUX Mode. ...
4. Source: Press the Source button to cycle through the various inputs. The order of the inputs is AUX, Bluetooth®, Optical, Coaxial, and HDMI® ARC. 5. Volume: Press the - button to decrease the volume level or the + button to increase the volume level.
Remote Control 1. POWER: Press the Power button to turn the soundbar on or to put it in Standby Mode. 2. SOURCE: Press one of the Source buttons to select the indicated source. 3. VOL+/VOL-: Press the VOL+ button to increase the volume level or VOL- to decrease the volume level.
Subwoofer Rear Panel 1. AC: AC socket for connecting the included AC power cord. 2. PAIR: Press the PAIR button to manually pair the subwoofer with the soundbar. 3. PAIRED LED: The LED illuminates flashes rapidly while pairing with the soundbar. It flashes slowly when the wireless pairing has failed.
Replacing the Battery With continued use, the battery will eventually need to be replaced. Perform the following steps to replace the CR2025 battery. 1. Invert the remote, then push the tab on the edge of the tray towards the tray. 2.
OPTICAL The soundbar features a digital optical audio input, allowing you to connect your TV or other audio source. Perform the following steps to use the OPTICAL input. 1. Remove the small, protective plug from the OPTICAL input on the soundbar. 2.
Power Perform the following steps to connect the soundbar and subwoofer to AC power. 1. Plug one of one of the included AC power cords into the AC socket on the soundbar, then plug the other end into a nearby AC power outlet. 2.
4. After the connection is established, the Paired LED will cease blinking and illuminate solid. 5. If the Paired LED starts blinking slowly, the wireless connection has failed. Unplug the subwoofer, wait for 3 minutes, then plug it back in and repeat steps 1-4. Notes: ...
Bluetooth Pairing To use the Bluetooth® audio connection, you must first pair the soundbar with your mobile device. Perform the following steps to pair the soundbar with your mobile device. 1. Ensure that your mobile device is located within about 26 feet (8 meters) of the soundbar.
Disconnecting Bluetooth You can break the Bluetooth connection between the soundbar and your mobile device using one of the following methods. Press the Source button on the soundbar top panel or press one of the Source buttons on the remote control other than the BT button to change the soundbar to a different mode.
Q3: The remote control doesn't work. A3: Ensure you have the correct source selected. Ensure you are aiming the remote control at the IR Receiver on the soundbar's front panel. Check the remote's battery to ensure polarity is properly aligned. Try replacing the battery. SPECIFICATIONS Model 38037...
TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates.
This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device.
This IC RSS-210 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device.