Table of Contents
Advertisement
Replacing the Battery
With continued use, the battery will eventually need to be replaced. Perform the following
steps to replace the CR2025 battery.
1. Invert the remote, then push the tab on the edge of the tray towards the tray.
2. Pull the tray out of the remote.
3. Remove the old battery, then insert the new battery into the tray with the +
terminal facing up.
4. Insert the tray into the remote until it clicks into place.
CONNECTIONS
HDMI ARC
The soundbar includes an HDMI® ARC (Audio Return
Channel) input, which allows you to send audio from
your TV to the soundbar over a single HDMI cable.
Note that your TV must support both the HDMI ARC
and HDMI CEC (Consumer Electronics Control)
features and be setup accordingly.
Using a High Speed HDMI Cable (not included), plug
one end into the HDMI ARC port on the soundbar, then plug the other end into the HDMI
ARC output on your TV. Note that the cable must be compliant with the HDMI 1.4
specification or later.
When properly configured, your TV remote control can be used to change the soundbar's
volume.
11
Advertisement
Table of Contents
