Getting Started; Getting To Know Your Freecom; Charging The Freecom; Switching Your Unit On/Off - Cardo Systems FREECOM 4+ Manual

2. GETTING STARTED

2.1 GETTING TO KNOW YOUR FREECOM 4+

2.2 CHARGING THE FREECOM 4+

Make sure that your FREECOM 4+ battery is charged for at least 4 hours before initial use.
To charge the unit:
1. Using the supplied USB cable, connect your computer or wall charger to the USB port on your FREECOM
4+.
Charging with the wall charger is faster than via a computer USB port.
●
Charging your unit switches it off automatically. To use your unit while it is being charged, switch it on.
●
(see

Switching Your Unit On/Off

While charging, the LED indicates the charging status as follows:
Red LED on — charging
●
Red LED off — charging complete
●
TIP: You can check the battery charge at any time by saying "Hey Cardo, battery status."
2.3 SWITCHING YOUR UNIT ON/OFF
To switch your FREECOM 4+ on:
Press both and
●
The speaker plays an ascending tone and a voice message greets you.
on page 5).
for 1 second.
5