Table of Contents
Advertisement
2.
You may wish to move the Fleet-Swap bays. There are two screws securing each Fleet-Swap bay to
the drive cage. To move or remove the Fleet-Swap bay, remove these screws, slide the Fleet-Swap bay
towards the side opposite the screws, and carefully remove it.
3.
Now move the Fleet-Swap bay to the desired location, secure it in place and screw it in. Fleet-Swap
bays can be relocated to anywhere in the 3.5" drive cage.
4.
Before you can use the hot-swap feature of the Fleet-Swap™ bays, you must install all related drivers
for your motherboard and enable the "AHCI" function in the BIOS to activate the hot swap feature.
19
All manuals and user guides at all-guides.com
A
A
A – Fleet-Swap™ SATA and power connectors
B – Fleet-Swap™ bay screws
Moving or removing a Fleet-Swap™ bay
B
B
1
2
Advertisement
Table of Contents
