Setting Up The Bravia Internet Video Link - Sony DMX-NV1 Operating Instructions (For DMX-NV1 model bundled with KDLxxWL140 Televisions) Operating Instructions Manual

Setting up the BRAVIA Internet Video Link

Refer to the section
Attaching the Receiver
to Your TV on page 20
for attachment
instructions.
Perform the following simple tasks to setup your receiver: make the cable
connections, connect to the Internet, and attach the receiver to your TV. Be
sure to turn off your TV before making any cable connections.
The receiver is packaged with the Cable Cover attached. Begin by removing
the Cable Cover as shown below.
Front of
Receiver
OUT
Gently slide the Cable Cover toward the rear side of the receiver, then pull
down.
LAN DC IN 9V
Getting Started
LAN DC IN 9V
OUT
11