Sony DMX-NV1 Quick Setup Guide (For DMX-NV1 model bundled with KDLxxWL140 Televisions) Quick Setup Manual

DMX-NV1
NETWORK VIDEO RECEIVER Quick Setup Guide
© Sony Corporation 2008. Printed in USA.
Setting up the BRAVIA
Your BRAVIA LCD TV includes BRAVIA Internet Video Link. The Sony BRAVIA Internet Video Link brings on-demand entertainment and information from the Internet, including movies, news, traffic, and weather.
High-speed Internet access is also required. Power off your TV before beginning the setup.
Remove Cable Cover
1
Remove the cable cover to expose the ports
located on the bottom of the receiver.
Front of
Receiver
Connect to the Internet
4
Choose one of the following recommendations to connect the BRAVIA Internet Video Link receiver to the Internet with easy "plug and play." Connect an Ethernet cable
(not supplied) between the receiver and your Internet source.
Gaming Adapter as Wireless Bridge
Receiver
Gaming
Adapter
Ethernet Cable
Wireless Router
Standard Definition video: 802.11g
High Definition video: 802.11n
z If you need to configure a fixed IP address or proxy server, check the Operating Instruction Manual for more information.
Confirm Connection
6
Follow these instructions to confirm.
a. Press the DMe button on your TV's remote control
X
to view the connection status.
z If "Feature available with DMeX module" appears on the
screen, wait a few moments and try again.
z The first time the receiver is connected to the
Internet, the software may require an update.
b. Follow the instructions on-screen to complete Region
Setup.
z Default country is the United States. Press the B
button to select a different country.
4-116-031-11(1)
Internet Video Link
®
Connect Cables
2
Connect the cables in the order shown below.
z Look for the serial number found on the bottom of
the receiver to record in the Owner's Record.
Powerline Ethernet Adapter
Receiver
Powerline
Ethernet
Adapter
Ethernet Cable
Ethernet Cable
Router
Standard Definition video: HomePlug Turbo,
HomePlug AV, UPA, HD-PLC
High Definition video: HomePlug AV, UPA, HD-PLC
c. When your region is setup, the receiver will attempt to
connect to the Internet. Upon succesful connection, you will
see the screen below.
BRAVIA ® Internet Video Link Accessories
Receiver (DMX-NV1) AC Adapter with
& Cable Cover AC Power Cord
Quick Setup Guide Attachment Guide
For Your Convenience
Please contact Sony Customer Support directly if you have questions on the use of your BRAVIA Internet
Video Link after reading your Quick Setup Guide and Operating Instruction Manual (available on the
Internet at http://internet.sony.tv/manual).
Contact Sony Customer Support at:
http://esupport.sony.com/bravialink
Or to speak with a support representative:
United States
1-866-918-BIVL (2485)
Please Do Not Return the Product to the Store
Please read all instructions before beginning the installation.
Refer to the separate Attachment Guide for instructions on mounting to your TV.
A B C D
B
A DC IN 9V: Connect the AC adapter to this port. Do not
plug into the wall outlet at this time.
B DMe x : Connect the small end of the USB cable to this
port.
C LAN: Connect an Ethernet cable (not supplied) to this
port.
D HDMI OUT: Connect the L-shaped end of the HDMI cable
to this port.
Direct to Router
Receiver
Ethernet Cable
Modem
Router
d. Press the HOME button on your remote control to display the
XMB . These menu icons associated with the receiver will
TM
appear when the service content providers are ready.
Video Icon Network Icon
Internet
Video Icon
Media Category Bar
z IMPORTANT: Do not press the INPUT button on the remote
control to access the BRAVIA™ Internet Video Link. It is
available on the XMB .
TM
HDMI Cable
Mounting Bracket
Owner's Record
-------------------------------
Record the serial
number below:
Mounting Knobs
USB Cable
Plastic Fasteners
z Ethernet cable required
(not supplied).
Connect to TV
3
B Connect the large end of the USB cable
to the DMe X /SERVICE port on the TV.
D Connect the straight end of the HDMI cable
to any HDMI port on the TV.
VIDEO IN COMPONENT IN PC IN IN DIGITAL
1 3 1 2 1 AUDIO
(OPTICAL)
Y RGB
S VIDEO
3
P B
VIDEO
P R 4 AUDIO OUT
L
(MONO) L L
AUDIO AUDIO AUDIO AUDIO AUDIO
R R R
(1080p/1080i/720p/480p/480i) (VAR/FIX)
5
Verify Connection
a. Plug in the receiver and power on the TV.
b. Once the receiver and TV are powered on,
confirm the LED lights.
Power LED
Network LED
NETWORK
When you see... Receiver...
Power Green is powered "On."
LED
Red is not connected. Check all cable
components.
Orange
is in update mode.
Network Green
is connected to the Internet.
LED
Blinking
has network activity.
Green
z If the LEDs do not light up in green, confirm that all
cables are securely connected.
Attach Cable Cover
7
Slide the cable cover back into place.
Front of
Receiver
V 9 I N C D A N L
T U O
B
z For instructions on attaching to the TV, see the
separate Attachment Guide.
B
B
OUT
DMe / x
SERVICE
D
CABLE / ANTENNA
V 9 I N C D
N A L
T U O