Table of Contents
Advertisement
BG590-24mHD
PIR
Trigger
PIR
Interval
Please note that if the PIR
Trigger is set to off, then Time
Lapse can't be set to off.
Default: OFF
This setting is for the sensitivity of
the PIR sensor. There are four
sensitivity
Normal,
Low,
recommended
sensitivity in areas with little
environmental interference and for
warmer, humid climates. Use LOW
sensitivity for areas that have a lot
of interference. The sensitivity of
the PIR is affected by temperature.
Higher temperatures lead to a
lower sensitivity.
Please note that if Time Lapse
is set to off, then PIR Trigger
can't be set to off.
Default: Normal
This interval shows how long the
PIR will be disabled after each
triggering in the ON mode. During
this time, the PIR sensor will not
react to any detected motion or
scheduled timer functions. The PIR
Interval can be set between zero
seconds to a maximum of 1 hour.
Press ► to adjust the desired PIR
Interval time.
11
parameters:
OFF.
to
use
High,
It
is
HIGH
Advertisement
Table of Contents
