BG590-24mHD 1. Getting Started 1.1 General Description BG590, is a digital infrared surveillance camera monitored by a highly sensitive Passive Infrared (PIR) motion sensor that can be triggered by any human or animal movements. After being triggered, the camera then automatically captures pictures or video clips.
BG590-24mHD 2. Camera Operations 2.1 Power Supply 4 or 8 AA batteries high-density, high-performance rechargeable or non-rechargeable alkaline batteries are recommended. You can also use NiMH batteries as well, but each battery should be above 1.5V. 2.2 SD Card Information...
BG590-24mHD inserted SD card, try reformatting the SD card through the camera’s main settings option. 2.3 Camera Modes The different modes are according to the position of the power switch. The three basic operation modes as below: OFF Mode Switching the camera to the OFF position turns the camera off.
BG590-24mHD the LCD display. The camera will automatically shut down after a few minutes of no operation. 2.4 Manual Image / Video Capturing Place the camera in SETUP Mode and press SHOT to manually capture photos or record video. Press SHOT again to stop video capture.
BG590-24mHD 2.7 T rigger odes There are 3 trigger modes for the cameras. PIR trigger: PIR trigger is constantly working when the camera is on. The camera takes photos/videos only when motion is detected. Time lapse: The time lapse default setting is OFF by default.
BG590-24mHD 3. Remote Display & Settings 3.1 Basic Key Function & Display To update the camera settings, place the power switch to the ON position. MENU: Enter the program menu in preview mode ▲▼◄►: Parameter settings as described in the user’s manual...
BG590-24mHD 3.2 Camera Setup Options To view the camera settings menu, you need to enter the SETUP Mode, and press MENU. Use ▲ or ▼ keys to select the sub-menu. Use ► keys to select the different options. Press “OK” to save the settings.
Page 12
BG590-24mHD The valid values for the year are between 2012 and 2050. Default:Enter Choose the image size: 10(D)/8(N) MP,16(D)/12(N)MP,24(D)/18(N) Photo Size MP options are available. Default: 24 MP Choose the number of photos taken Photo after the camera is triggered: 1 Burst Photo, 2 Photos, or 3 Photos.
Page 13
BG590-24mHD Please note that if the PIR Trigger is set to off, then Time Lapse can’t be set to off. Default: OFF This setting is for the sensitivity of the PIR sensor. There are four sensitivity parameters: High, Normal, Low, OFF.
Page 14
BG590-24mHD Default: 5 seconds This is where you can change the camera position. You can set A-Z Camera position for your camera to help Position distinguish which photo was taken by which camera. Default: OFF If the SD card is full in hunting...
BG590-24mHD 4. PIR Detection Zone The PIR’s detection range can reach 70ft in an open environment. The following picture shows this camera’s PIR detection range compared to standard PIR detection range. The PIR detection angle (α) is smaller than the field of view angle (β).
BG590-24mHD 5. Technical Specifications Image Sensor 5MP CMOS Sensor F/NO=2.2 Lens Field of View=55° LED Type 940Nm LED Number 40Pcs Detection range 100Ft. Illumination Distance 100Ft. Display Screen on Remote 2" LCD Control Memory Card Up to 32 GB 10(Day)/8(Night) MP...