Removing The Hard Disk Drive - AMD D900K Service Manual

Removing the Hard Disk Drive

The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" IDE hard disk drives
with a height of 9.5mm (h). Follow your operating system's installation instructions, and install all necessary drivers and
utilities (as outlined in Chapter 4 of the User's Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
1. Turn off the computer, and turn it over and remove the battery
2. Locate the hard disk bay cover and remove screws
3. Remove the bay cover .
5
4. Carefully release the cable
5. Remove screws - in order to separate the bracket
8 15
.
18
6. Reverse the process to install a new hard disk(s).
a.
1 2
3
4
b.
5
All manuals and user guides at all-guides.com
- .
1 4
and lift the hard disk assembly
6
16
c.
7
(page 2 - 5).
up out off the computer.
7
from the hard disk(s) , and disconnect the cable
17
d.
17
15
14
16
8
6
9
10
11
Disassembly
Figure 3
HDD Assembly
Removal
a. Remove the screws.
b. Remove the cover
c. Release the cable and lift
the hard disk assembly
up out off the computer.
d. Remove the screws and
separate the bracket from
the HDD(s) and remove
the connector.
c.
13
12
5. Hard Disk Bay Cover
7. Hard Disk Assembly
16. HDD Braket
18
17. HDD
• 12 Screws
Removing the Hard Disk Drive 2 - 7