Changing The Sound And Display Settings; Adjusting The Frequency Of The Subwoofer(S); (Xr-C8220R Only) - Sony XR-C7220R Operating Instructions Manual

Changing the sound and
display settings
The following items can be set:
• Clock (page 7)
• CT (Clock Time) (page 18)
• D.Info (Dual Information)*
clock and the play mode simultaneously (on),
or to display the information alternately (off).
• Amber/Green – to change the illumination
colour to amber or green.
• Dimmer – to change the brightness of the
display.
— Select "Auto" to dim the display only
when you turn the interior lights on.
— Select "on" to dim the display.
— Select "off" to deactivate Dimmer.
• Contrast – to adjust the contrast if the
indications in the display are not
recognizable because of the unit's installed
position.
1, 3
•Voice guide* function for vocalized
comments.
— Select "Voice 1" to minimize the volume
of the guide.
— Select "Voice 2" to choose a louder
volume than "Voice 1."
— Select "Voice 3" to maximize the volume
of the guide.
— Select "Voice off" to deactivate the Voice
guide.
• Beep – to turn the beep sounds on or off.
• RM (Rotary Commander) – to change the
operative direction of the controls of the
rotary commander.
— Select "norm" to use the rotary
commander in the factory-set position.
— Select "rev" when you mount the rotary
commander on the right hand side of the
steering column.
• L.out (Line Output)*
1
• Loud (Loudness)* – to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
• LPF (Low Pass Filter)*
•M.dspl (Motion Display) – to turn the motion
display to 1, 2, or off.
•English/Spanish* 1, 3 – to change the vocalized
comments of the Voice guide to English or
Spanish.
•A. Scrl (Auto Scroll)*
1 – to display the
2, 3
(page 22)
1, 3
1 (page 23)
1
Press (SHIFT).
2
Press (3) (SET UP) repeatedly until the
desired item appears.
Each time you press (3) (SET UP), the item
changes as follows:
Clock n CT n D.Info*
Dimmer n Contrast n Voice*
RM n L.out* 2, 3 n Loud*
M.dspl n English/Spanish*
When the radio is off, or when no tape, CD,
* 1
or MD is playing, this item will not appear.
2 When the optional equalizer preamplifier is
*
not connected, this item will not appear.
3 XR-C8220R only
*
3
Press (5) (n ) to select the desired
setting (Example: on or off).
For the "Contrast" setting, pressing (5)
(n ) makes the contrast higher, and
pressing (2) (N ) makes the contrast lower.
4
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
Adjusting the frequency
of the subwoofer(s)

(XR-C8220R only)

To match the characteristics of the connected
subwoofer(s), you can cut out the unwanted
high and middle frequency signals entering
the subwoofer(s). By setting the cut-off
frequency, the subwoofer(s) will output only
low frequency signals so you can get a clearer
sound image.
1
Press (SOURCE) to select a source (radio,
tape, CD, or MD).
2
Press (SHIFT), then press (3) (SET UP)
repeatedly until "LPF off" appears.
continue to next page n
1 n Amber/Green n
1, 3 n Beep n
1 n LPF* 1, 3 n
1, 3 n A.Scrl* 1
21