Sony XR-C7220R Operating Instructions Manual page 26

Notes
• If you press a number button during programme
memory play, programme memory play is
interrupted, and playback of the selected disc
starts.
• "NO Data" appears in the display if no track is
stored in the programme.
• If a track stored in the programme memory is not
in the disc magazine, the track will be skipped.
• When the disc magazine contains no tracks
stored in the programme memory, or when the
programme information has not been loaded
yet, "Not ready" appears.
Erasing an entire programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
RLAY MODE
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P" above.
2
Press (2) (N ) repeatedly until "DEL"
appears.
RLAY MODE
3
Press (6) (ENTER) for two seconds.
RLAY MODE
The entire programme is erased.
4
When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
5
Press (SHIFT).
26
ENTER
ENTER
ENTER
Adding tracks to a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
RLAY MODE ENTER
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P" above.
2
Press (2) (N ) or (5) (n ) to select the
track slot number where you want to
insert a track.
Track slot number
DISC TRACK
RLAY MODE ENTER
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) to enter the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
5
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).