Epson ACTIONSCANNER II Manual

Document cover
Document glass (platen)
OPERATE button
RESET button ERROR light

Scanner Specifications

Scanner type:
Flatbed, color/monochrome
Photoelectric device:
CCD line sensor
Effective pixels:
2550 dots by 3510 dots at 300 dpi, 100%
Maximum document size:
216 mm by 297 mm (8.5 inches by 11.7 inches)
U.S. letter size or A4

Scanning resolution:

300 dpi

Output resolution:

50 dpi to 1200 dpi in 1 dpi steps
Color separation:
By switching light sources (R, G, B)
Reading sequence:
Monochrome mode:
One-pass scanning (Dropout color selectable
from Red, Green, or Blue)
Color page sequence mode:
Three-pass scanning (R, G, B)
Scanners
OPERATE light
READY light
Storage hole Parallel port
Storage hole Transportation screw
Carriage
(at home
position)
Color byte sequence mode:
Three-pass scanning (R, G, B)
Color line sequence mode:
One-pass scanning (R, G, B)
Size:
50% to 200% in 1% steps
Image data:
8 bits per pixel per color saved as 8 bits per pixel per color,
maximum
Brightness:
7 levels
Text Enhancement Technology:
Enable/disable selectable
Halftoning process:
Enable/disable selectable
3 halftoning modes (A, B, and C)
4 dither patterns (A, B, C, and D)
for bi-level data or quad-level data
(2 downloadable dither patterns)

Gamma correction:

2 for CRT display
3 for printer
1 for user-defined
10/95
EPSON ACTIONSCANNER II
Transportation screw DIP switch
Terminator DIP switch
SCSI interface connectors
ActionScanner II-1
AC inlet
AC inlet