Mitsubishi Electric PUHZ-W50VHA Service Manual page 4

PUHZ-HW112YHA(-BS)
PUHZ-HW140VHA(-BS)
PUHZ-HW140YHA(-BS)
1. Heat exchanger has been changed.
2. Compressor has been changed. (only HW140)
HW140V : ANB33FJGMT → ANB42FJGMT
HW140Y : ANB33FJFMT → ANB42FJFMT
3. Refrigerant charge has been changed. (only HW140)
4.0 kg → 4.3 kg
4. Plate heat exchanger has been changed.
ACH50 → ACH70
5. Muffler has been deleted.
6. Outdoor controller board (C.B.) has been changed. (S/W version up)
7. Outdoor power board (P.B.) has been changed.
8. Liner expansion valves (for LEV-A,B) have been changed.
9. Charge plug (high pressure side) has been changed. (Straight type → Bend type)
PUHZ-W85VHA
PUHZ-W85VHA-BS
1. Comp. surface thermistor (TH33) has been added.
2. Discharge thermistor (TH4) has been changed.
3. Controller circuit board (C.B.) has been changed. (S/W version up)
OCH439M
PUHZ-HW112YHA2(-BS)
PUHZ-HW140VHA2(-BS)
PUHZ-HW140YHA2(-BS)
PUHZ-W85VHAR1
PUHZ-W85VHAR1-BS
4