Bluetooth; Pairing Your Ktc-500Dab With A Mobile Device; Listening To Audio Stored On Your Mobile Device - Kenwood KTC-500DAB Manual

Bluetooth

Pairing your KTC-500DAB with a mobile device

You can use Bluetooth to wirelessly connect to a mobile device. You can then stream music from your mobile device and make hands-
free calls.
1. Switch on Bluetooth on your mobile device.
2. Press on the wireless controller for your KTC-500DAB.
3. Turn and press the Select dial to choose 'SETTINGS' > 'BLUETOOTH' > 'PAIR'.
4. On your mobile device, choose your KTC-500DAB from the list of Bluetooth devices and connect to it.
After you've paired a mobile device with your KTC-500DAB, your KTC-500DAB automatically connects to it when it's nearby.
To forget a paired mobile device on your KTC-500DAB, press

Listening to audio stored on your mobile device

If you connect your KTC-500DAB to a mobile device using Bluetooth, you can play music that is stored on your mobile device.
1. Press .
2. Turn and press the Select dial to choose 'BT MUSIC'.
3. Turn and press the Select dial to choose a song to play.
4. To skip to the previous or next song, press
Note: If you see 'BROWSE NOT AVAILABLE', your mobile device or the current app does not support browsing.
If you see '+', the item is a folder that contains audio files. Press the Select dial to open the folder.
14
. Then choose 'SETTINGS' > 'BLUETOOTH' > 'FORGET'.
or . To play and pause the current song, press .