Connecting The Antenna - Kenwood KTC-500DAB Manual

Hide thumbs Also See for KTC-500DAB:

Table of Contents

Connecting the antenna

1. Place the antenna cable so that it follows a path to your vehicle's power socket.

2. If possible, tuck the cable behind the trim down the side of your windscreen.

Alternatively, secure the cable to your windscreen and dashboard with self-adhesive

clips.

3. Gently pull the auxiliary cable from the USB power cable to separate them.

4. Insert the USB power cable into the supplied 12V power adapter, then insert the

power adapter into your vehicle's power socket.

5. If you're connecting your KTC-500DAB with an auxiliary cable, insert the cable into

your vehicle's auxiliary socket. If you're connecting your KTC-500DAB by FM radio,

you can store the auxiliary cable so it's out of the way.

We recommend you connect your KTC-500DAB with an auxiliary cable to get the

best audio quality.

Table of Contents