LG CJ65 Service Manual page 37

NO OPERATION OF MD
When no sound output in the CD function, you can not listen to music reading data from a CD disc if
the pickup module in MD doesn't work. This step is for checking the LASER FOCUSING ACTUATOR.
4-5. LASER FOCUSING ACTUATOR
4-5-1. Solution
Please check and replace IC400, IC401 on MAIN board.
4-5-2. How to troubleshoot (Countermeasure)
The focusing actuator makes the laser beam keep a regular interval with the surface of a CD disc.
1) Check the FOD signal from Pin21 of IC400.
  If no signal, check 3.3 V(RF) and X400.
2) Check F- & F+ from IC408 to CN401 for driving the focusing actuator.
  If no signal, check +1.8 V and +5 V for IC401.
3) Check if the FFC cable is solidly connected between CN401 and MD.
4) Check the MD.
  If the pickup module has any trouble, it can not move the laser beam on the top or bottom side.
Please check the function after changing another MD.
4-5-3. Service hint (Any picture / Remark)
< Waveform of F±
for driving FOCUSING actuator >
ONE POINT REPAIR GUIDE
< Signal check point >
3-10