Kenwood TK-3360 Service Manual page 9

DISASSEMBLY FOR REPAIR /
4. Attaching the Antenna Receptacle to
the Chassis
Screw the antenna receptacle to the chassis in the order
shown in the drawing so that the antenna receptacle
comes to the center of the case hole.
5. The Nuts of the Volume Knob and
Selector Knob
Note that the shapes and heights of nuts of the volume
knob and selector knob are different from one another.
Use the following jig when removing the nuts of the vol-
ume knob and selector knob.
• Jig (Part No.: W05-1012-00)
4. 把天线座安装到机架
Tighten this screw first.
首先拧紧此螺丝
Tighten this screw second.
然后再拧紧此螺丝
5. 关于音量旋钮和选择器旋钮的螺母
for Volume knob for Selector knob
音量旋钮的螺母 选择器旋钮的螺母
(Long / 长 ) (Short / 短 )
维修拆卸
为了能把天线座安装到机芯孔的中心，在将天线座安装到
机架时，请按照图示的顺序固定螺丝。
音量旋钮和选择器旋钮的螺母形状不同，颜色高度也不同，
因此请注意。
另外，拆卸音量旋钮和选择器旋钮的螺母时，请使用下列
夹具。
• 夹具 ( 零件号∶ W05-1012-00)
TK-3360
9