Kenwood TK-3360 Service Manual page 8

TK-3360
3. Mounting the Chassis to the Case
Assembly
1. Mount the holder q to the chassis w.
Confi rm that the holder is securely locked to the chassis.
2. Insert the packing e to the phone jack side of the chas-
sis.
Confi rm the mounting direction of packing.
3. Insert the packing r to the chassis.
Confi rm that the packing is securely inserted to the chas-
sis and that it does not protrude out.
4. Insert the upper part of the chassis into the case assem-
bly t.
5. Press the chassis and the case assembly together to at-
tach them.
BWN / 褐色
GRE / 绿色
BLK / 黑色
RED / 红色
Note:
Solder the speaker wire
back in its original position
if you have removed it.
注意 :
如果取下了扬声器的导线，
请将其焊接到原位上。
8
DISASSEMBLY FOR REPAIR /
维修拆卸
3. 将底座安装到壳体组件上
1. 把支架 q 安装到机架 w 上。
确认支架是否确实锁定在机架上。
2. 把橡胶垫 e 插入到机架的 SP/MIC 插口里。
确认橡胶垫的安装方向。
3 把橡胶垫 r 插入到机架里。
确认橡胶垫④是否确实安装在机架上和是否突出。
4. 把机架上部插到机壳里 t。
5. 按压机架，使机架和机壳成为一个整体。