Chapter 4; Caring For Your System; Troubleshooting Your System - RF Technologies Code Alert CA630 User Manual

Fall management system
Table of Contents

Advertisement

Caring For Your System

Do not immerse the control unit in liquid; dry clean with alcohol wipe.
Do not carry or move the control unit or the sensor pad by the cable(s).
N
: Remove the 9-volt alkaline battery from the control unit if the CA630 Fall
OTE
Management System will not be used for a prolonged period.

Troubleshooting Your System

1.
If the control unit issues a Fall Alert but the resident has not left the bed or
chair, check the position of the Sensor Pad.
2.
If the control unit does not issue an alert when the resident leaves the bed or
chair:
Check to see that the battery is properly connected and operational; the
green light on the control unit should blink every 2 seconds.
Check to see that nothing is obstructing the buzzer holes.
Check the position of the Sensor Pad. Refer to the instructions on the
Sensor Pad for placement of the pad on the bed or chair.
Check to see that the Sensor Pad plug is properly inserted in the proper
jack on the control unit.
CA630 In-Service Manual Guide
0510-1116-C
CHAPTER 4 Maintenance

CHAPTER 4

Maintenance
Page 17 of 23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Code Alert CA630 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents