Glossary And Terminology; Requesting Technical Assistance; Manufacturer's Liability - Siemens SIMOTICS GP Compact Operating Instructions

1.3 - GLOSSARY AND TERMINOLOGY

Some of the frequently occurring terms used in this manual are described below so as to unequivocally defi-
ne their meaning.
Routine maintenance: the set of operations required for maintaining the functionality and efficiency of the
gear unit. These operations are usually scheduled by the Manufacturer, who defines the qualifications requi-
red and tasks in question.
Non-routine maintenance: the set of operations required for maintaining the functionality and efficiency of
the gear unit. These operations are not scheduled by the Manufacturer and must be done by an expert main-
tenance technician.
Expert maintenance technician: an authorised technician selected by means of having the qualifications,
skills and mechanical and electrical training to do repairs and non-routine maintenance work on the gear unit.
Overhaul: an overhaul consists in the replacement of bearings and/or other mechanical components which
have worn to such an extent as to compromise the operation of the gear unit. The overhaul also includes ve-
rification of the condition of all gear unit components (keys, seals, gaskets, vents, etc.). If any such compo-
nents are damaged they must be replaced and the reason for the damage identified.

1.4 - REQUESTING TECHNICAL ASSISTANCE

For any technical service needs, contact the Manufacturer's sales network, quoting the information on the
unit's nameplate, the approximate hours of service and the type of defect.

1.5 - MANUFACTURER'S LIABILITY

The Manufacturer declines all liability for cases of:
•
use of the gear unit in violation of local laws on safety and accident prevention at work.
•
incorrect installation, disregard or incorrect application of the instructions provided in this manual.
•
incorrect or defective power supply (gearmotors).
•
modifications or tampering.
•
work done on the unit by unqualified or unsuitable persons.
The safety of the gear unit also depends on scrupulous observance of the instructions given in this manual,
in particular:
•
always operate the unit within its operating limits.
•
diligently observe the routine maintenance schedule.
•
only authorise trained operators to inspect and service the unit.
•
use only original spare parts.
•
the configurations given in the gear unit catalogue are the only ones permitted.
•
do not attempt to use the unit contrary to the instructions supplied.
•
the instructions given in this manual do not substitute but summarise the provisions of applicable
safety legislation.
4