Cassette Player; Listening To A Tape; Playing Tracks Repeatedly; Repeat Play - Sony Model XR-C7200 Operating Instructions Manual

Cassette Player

Listening to a tape

1
Press (OPEN) and insert a cassette.
Playback starts automatically.
2
Close the front panel.
If a cassette is already inserted, press
EN
(SOURCE) until "FWD" or "REV" appears to
start playback.
The side facing up is being played.
F W D
SUR EQ
The side facing down is being played.
R E V
SUR EQ
Tips
• To change the tape transport direction, press (MODE)
(*).
• "Metal" appears in the display when you insert a metal
or CrO tape (Auto Metal function).
2
To
Stop playback
Eject the cassette
Fast-winding the tape
During playback, press either side of
(SEEK/AMS) for one second.
SEEK/AMS
Fast-forward
Rewind
To start playback while fast-forwarding or
rewinding, press (MODE)(*).
6
6
Play
Play
Press
(OFF)
(OPEN) then 6
Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS) momentarily.
SEEK/AMS
To locate
succeeding tracks
To locate preceding
tracks
Note
The AMS function may not work when:
• the blanks between tracks are shorter than four seconds.
• there is noise between tracks.
• there are long sections of low volume or quiet sections.
Changing the displayed item
Each time you press (DSPL), the item changes
as follows:
z Tape playback z Clock
* While the ATA function is activated.

Playing tracks repeatedly

— Repeat play

You can repeat play the current track.
1
During playback press (SHIFT).
Each time you press (SHIFT), only the items
you can select light up.
PLAY MODE
1 2
SHIFT
2
Press (6) (REP).
Repeat play starts.
To go back to the normal playback mode, press
(6) again.
3
Press (SHIFT).
z Frequency*
REP
3 4 5 6