Storing The Station Names; Station Memo; Locating A Station By Frequency And Name; List-Up - Sony Model XR-C7200 Operating Instructions Manual

Storing the station names

— Station Memo

You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can store up to eight characters
for a station.
Storing the station names
1
Tune in a station whose name you want
to store.
2
Press (LIST) for two seconds.
F M 1
SUR EQ 2 ________
3
Enter the characters.
1 Rotate the dial in a clockwise
direction to select the desired
characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
F M 1
SUR EQ
2 W_______
If you rotate the dial in a
counterclockwise direction, the
characters appear in the reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
F M 1
SUR EQ 2 W_______
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
4
To return to the normal radio reception,
press (LIST) for two seconds.
Tip
To erase/correct a name, enter "_" (under-bar) for each
character.
Displaying the station name
Press (DSPL) during radio reception.
F M 1
SUR EQ 2 WRKISS
Each time you press (DSPL), the item
changes as follows:
z Frequency
Station name* Z
* If the station name is not stored, "NO Name"
appears in the display for one second.
Erasing the station name
1
Tune in any station and press (LIST) for
two seconds.
2
Press (DSPL) for two seconds.
"Delete" and the station name appear in the
display.
3
Rotate the dial to select the name that
you want to erase.
4
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
5
Press (LIST) for two seconds.
The unit returns to the normal radio
reception mode.
Locating a station by
frequency and name
You can search for the memorized stations
names in the display.
1
Press (LIST) momentarily.
The frequency or the name assigned to the
station currently receiving appears in the
display.
L S T
SUR EQ 2 WRKISS
ENTER
2
Press (LIST) repeatedly until you find the
desired station.
3
Press (5) (ENTER) to tune in the desired
station.
Note
Once the station name or frequency has been displayed for
five seconds, the display goes back to its normal mode.
To go back to the normal mode, press (DSPL).
z Clock
EN

— List-up

9