Selecting The Audio Output Mode; Audio Out; Selecting The Compression Setting For The Sound; Dynamic - Sony MV-101 Operating Instructions Manual

Car audio: mobile dvd
Hide thumbs Also See for MV-101:
Table of Contents

Advertisement

Selecting the audio output
mode

— AUDIO OUT

You can select the audio output setting from
"SPDIF/RAW" or "SPDIF/PCM."
SPDIF (Sony/Philips Digital Interface) is a
standard of audio transfer file format. SPDIF
allows the transfer of audio, however, signal
quality may be degraded.
SPDIF/RAW: outputs the original audio data in
SPDIF format.
SPDIF/PCM: outputs the sampling of the
original audio data in SPDIF
format.
1
Press (SETUP).
The main page for setup appears.
2
Press M or m repeatedly to select "AUDIO
SETUP," then press (ENTER).
3
Press M or m repeatedly to select "AUDIO
OUT," then press ,.
-- AUDIO SETUP - -
AUDIO OUT

DYNAMIC

MAIN PAGE
RAW DATA VIA SPDIF
4
Press M or m repeatedly to select the
desired item from "SPDIF/RAW" or
"SPDIF/PCM."
5
Press (ENTER).
"SPDIF/RAW OUTPUT" is displayed at
the lower left on the screen, for example if
you select "SPDIF/RAW" in step 4.
To return to normal play screen, press
(SETUP) anytime.
Note
To return to the main page for setup, press M/m/<
repeatedly to select "MAIN PAGE," then press
(ENTER).
Selecting the compression
setting for the sound
— DYNAMIC
You can select the compression setting for the
sound. If you set the DYNAMIC setting to
"OFF" and watch an exciting movie, you can
enjoy dynamic sound to its best effect.
However, for example, if the sound is too
dynamic and loud to hear low level sound
such as human voices, try adjusting the
dynamic range.
1
2
3
SPDIF/RAW
SPDIF/PCM
4
5
To turn off the dynamic range of sound
volume, select "OFF" in step 4.
To return to normal play screen, press
(SETUP) anytime.
Note
To return to the main page for setup, press M/m/<
repeatedly to select "MAIN PAGE," then press
(ENTER).
Press (SETUP).
The main page for setup appears.
Press M or m repeatedly to select "AUDIO
SETUP," then press (ENTER).
Press M or m repeatedly to select
"DYNAMIC," then press ,.
-- AUDIO SETUP - -
AUDIO OUT
DYNAMIC
MAIN PAGE
FULL DYNAMIC RNG COMPRESSION
Press M or m repeatedly to select the
desired item from "FULL," "HIGH," "MID"
or "LOW."
Press (ENTER).
FULL
HIGH
MID
LOW
OFF
23

Advertisement

Table of Contents
loading

Table of Contents