7
Errors / Technical Support
Error
Reasion
The sensor
There is no
pulses blue
connection to the
Internet.
The sensor
The sensor is not
does not
connected to the
light up
power supply.
The LED
brightness is set
too low
Solution
Connect the sensor to the
Internet (see chapter 6).
The settings of your wireless
access point or router may
prevent the integration of new
devices. Read, if necessary,
the operating instructions of
your WiFi access point or
your WiFi router.
Check the power supply of
the sensor.
Check the set brightness of
the sensor in the idevices
app.
12