Sound Adjustments; Changing The Audio Channels - Sony DVX-11A Operating Instructions Manual

Sound Adjustments

Changing the audio channels

When playing a DVD recorded in multiple audio
formats (PCM, Dolby Digital, or DTS), you can
change the audio format. If the DVD is recorded
with multilingual tracks, you can also change the
language.
With VCDs, you can select the sound from the
right or left channel and listen to the sound of the
selected channel through both the right and left
speakers. For example, when playing a disc
containing a song with the vocals on the right
channel and the instruments on the left channel,
you can hear the instruments from both speakers
by selecting the left channel.
OFF
1
4
7
TOP MENU
MENU
M/m
During playback, press (AUDIO)
repeatedly to select the desired audio
channels.
1:ENGLISH DolbyD
Audio sound settings differ depending on the
disc as follows:
DVD:
The audio language switches among the
available languages.
When 4 digits appear, input the language code
corresponding the desired language
(page 38).
When the same language is displayed two or
more times, the DVD is recorded in multiple
audio formats.
20
DISPLAY
2 3
CLEAR
5 6
8 9 0
+
ALBUM LIST
ENTER
SETUP
ENTER
SETUP
ANGLE
–
ALBUM AUDIO SUBTITLE
– +
SEEK SEEK
VCD:
STEREO*: Standard stereo sound
1/L: Left channel sound (monaural)
2/R: Right channel sound (monaural)
* The default setting
Tip
You can also change the settings by selecting
"AUDIO" in the Play mode menu (page 10).
Checking the program format
You can check the number of channels and
component position on the DVD being played.
1
During playback, press (SETUP).
The Play mode menu appears.
2
Press M/m to select "
then press (ENTER).
The program format appears.
12 ( 67 )
018 ( 034 )
T 01:35:55
1:ENGLISH
Current program format*
The letters in the program format display
represent the following sound components
and its positions:
:Front (left)
:Front (right)
:Center
:Rear (left)
:Rear (right)
:Rear (monaural): The rear component
of the Dolby Surround processed signal
and the Dolby Digital signal
:Low Frequency Effect signal
When "DOLBY DIGITAL" is applied, the
program format name and channel numbers
appear as follows:
Example: Dolby Digital 5.1 ch
DOLBY DIGITAL 3 / 2 . 1
Front component×2 +
Center component×1
" (AUDIO),
Current audio format*
PLAY
DVDVIDEO
PROGRAM FORMAT
3 / 2. 1
DOLBY DIGITAL
L C R
LFE
LS RS
2
Rear component×2
LFE component×1
1