Sony CDX-MP450X Primary User Manual (English, Español, Français) Operating Instructions Manual page 17

Playing the stored program
During playback, press (3) (PGM).
Program Play starts.
To return to normal play mode, select
"PGM -OFF."
Note
"NO DATA" appears in the display if no file is
stored in the program.
Erasing an entire program
1
During playback, press (MENU), then
press either side of (FLDR/PRESET)
repeatedly until "PGM-SET" appears.
2
Press (ENTER).
3
Press the (–) side of (FLDR/PRESET)
repeatedly until "ERASE-ALL" appears.
4
Press (ENTER) for 2 seconds.
The entire program is erased.
5
Press (MENU) twice.
Adding files to the program
1
During playback, press (MENU), then
press either side of (FLDR/PRESET)
repeatedly until "PGM-SET" appears.
2
Press (ENTER).
When adding a file to the end of a program,
skip step 3.
3
Press either side of (FLDR/PRESET)
repeatedly to select the program
number where you want to insert a new
file.
4
Press either side of (SEEK) repeatedly to
select the new file.
5
Press (ENTER).
The selected file is inserted at that program
number, and the succeeding files are
renumbered.
To continue inserting files, repeat steps 3 to
5.
6
Press (MENU) twice.
Note
Once all 20 slots have been filled, "**FULL**"
appears in the display, and you cannot insert more
files.
continue to next page t
Program No.
17