Enclosure Specifications; Instructions For Use - ProFire PF3100 Series Product Manual

6. Enclosure Specifications

The IO Expansion card can be mounted in a fire-proof enclosure that is safe for the area of operation (e.g. –
hazardous/non-hazardous.) The UIX and CTX enclosures described below are examples:
Specifications
Dimensions
Hazloc Rating
Mounting
Enclosure Construction
Operating Temperature
Storage Temperature

7. Instructions for Use

The IO Expansion card is designed to be used with a certified BMS controller as part of the PF3100 platform. The
only connection to the BMS is the PFRN. External power is not required for the board. Configuration of the card
settings are performed on the PF3100 User Interface.
Operation
Operating controls and their uses are described under Terminal Descriptions above.
The IO Expansion card has three (3) types of IO: Power, 4-20mA or Digital Input, and Dry Contacts.
Power
The board can be set to 12V or 24V. This will change the voltage of the PWR output terminals. 12V mode is
actually running at 13.5V nominal.
4-20mA or Digital Inputs
This can be set in the Settings area of the User Interface.
Dry Contacts
Dry contacts can be set to different operating modes. Please see PROFIRE's PF3100 Software Setup Guide at
the following site for details: http://3100.profireenergy.com/pf3100-documentation/.
Reset Switches
These switches are not intended for use in normal operations.
PROFIRE
1.855.776.3473
solutions@profireenergy.com
Enclosure Type
UIX
Height 30.9cm (12.15 inches)
Width 23.4cm (9.23 inches)
Depth 13.4cm (5.28 inches)
Class I Div 2
Channel Bar or Direct Mount
Poly Painted Steel
-40°C (-40°F) to 60°C (140°F)
-40°C (-40°F) to 60°C (140°F)
PF3100 IO Expansion Card Product Manual
CTX
Height 30.9cm (12.15 inches)
Width 23.4cm (9.23 inches)
Depth 13.4cm (5.28 inches)
Class I Div 2
Channel Bar or Direct Mount
Poly Painted Steel
-40°C (-40°F) to 60°C (140°F)
-40°C (-40°F) to 60°C (140°F)
Page 9 of 12