Elation C-LOADER II User Manual page 12

U P D A T E
¬ ®
Select Update, then use to select between a UpdateSpeed:Fast or UpdateSpeed:Slow.
¿
UpdateSpeed:Fast is selected by default and is recommended. With UpdateSpeed selected, press <Enter>
again to enter the Software Update folder.
With the Software Update files open, note that there will be some corrupted files among them, which show as
similar to above. This is normal, and are not harmful to the fixture. Now check the fixture display to ensure a
connection. In this case, the fixture display reads as Update Connect.
¿
¬ ® ­¯ .
Use and to navigate to the desired file, then press <Enter> This opens a screen with the file name,
and the choice to Start or Return. Selecting Start begins the updating process and a process status screen
opens. When this process completes, you are given the choice to Continue or Finish.
Continue the process until you have updated all the desired files.
With the completion of each Software Update, the fixture will display the various files that are being updated,
and then sequentially display each successive file completed: Update 1Correct, Update 2Correct, etc.
12 ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands